Atlas Material Testing Technology LLC
Phone +1-773-327-4520
Fax +1-773-327-5787
Email: info@atlas-mts.com

Atlas Material Testing Technology GmbH
Phone +49-6051-707140
Fax +49-6051-707149
Email: info@atlasmtt.de

You are here: Start / Products / Laboratory Weathering Testing / Metal Halide Systems /

SC 340 Solar Simulation Chamber (MH/MHG)


SC 340 Solar Simulation Chamber (MH/MHG)
click to enlarge
SC 340 Solar Simulation Chamber (MH/MHG)
Full function climatic chamber with additional simulation of global sunlight spectra. With its 340 l test chamber, the SC340 is suited to test material samples and component sections.



 
  • Radiation source: Metal Halide Lamp, 1 x 1500 W (Type MH); 1 x 1200W (Type MHG)
  • Chamber volume: 580 x 765 x 750 mm (WxDxH)
  • Filter system: Outdoor/Indoor
  • Irradiance: 1000W/m2 (Type MH) ; 800-1200 W/m2 (Type MHG)
  • Spectral distribution: Global Radiation 280 ? 3000 nm (Base: CIE, Table 4; Share: DIN 75220, Table 1, Column 2/4)
  • Temperature ranges w/ radiation: -20 °C to 100 °C
  • Temperature ranges w/o radiation ?30 °C to 100 °C
  • Heating rate: 3.0 K/min
  • Cooling rate: 2.5 K/min
  • Irradiated area approx. 1600 cm²
  • Touch control panel
  • Micro-processor monitoring and control unit SIMCON/32
  • Digital customer I/O, potential-free 24 V, 4 freely disposable inputs/outputs
  • Independent adjustable temperature limiter tmin / tmax
  • Adjustable software temperature limiter min./max.
  • Humidity input and display in % rel. humidity
  • Centronics printer interface
  • Serial interface RS 232
  • Potential-free contact for switching-off of test specimens
  • European socket
  • Calibration of 2 temperature values and 2 climate values
  • Air-cooled refrigeration unit
  • Condensation protection (dehumidification during heating phase)
  • Aerosol-free humidification and dehumidification
  • Psychrometric humidity measuring system
  • Water supply tank for humidification water with level indication
  • Automatic water replenishment with low water alarm
  • 1 Entry port, NW 50 mm, left-hand side
    1 Entry port, NW 125 mm, right-hand side
  • 1 Shelf made of stainless steel
  • 1 Set of operating instructions
  • Temperature range +15 °C to +80 °C
    Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal d±0.5 K
    Humidity range 10 % to 80 % r. h.
    Dew point range +5 °C to +74 °C
    Humidity fluctuation with steady state conditions depending on climatic value temporal ±3.0 % to ± 5.0 r. h.
  • Temperature range approx. -20 °C to +100 °C
    Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal d±1.0 K
  • Radiation intensity 1000 W/m² in the range from 280 to 3000 nm, in a distance of 600 mm
    Homogenity ±5 %
    Spectral radiation performance according to DIN 75220 Tab 1 print 2/4
    Kind of radiation metal-halogenid lamp, 1 x 1,5 kW
    Irradiated area approx. 1600 cm²
  • Temperature range approx. -30 °C to +100 °C
    approx. -40 °C to +120 °C (light transmission aparture closed with optional isolation cover) Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal ±0.1 K to ±0.5 K
    Temperature rates of change according to IEC 60068-3-5 heating: approx. 3.0 K/min. cooling: approx. 2.5 K/min. Calibrated temperature values +23 °C and +80 °C
  • Temperature range +10 °C to +90 °C
    Temperature fluctuation with steady state conditions according to IEC 60068-3-5 depending on the test space temperature temporal ±0.1 K to ±0.3 K
    Humidity range 10 % to 90 % r. h.
    Dew point range +5 °C to +87 °C
    Humidity fluctuation with steady state conditions depending on climatic value temporal d±3.0 % r. h.
    Calibrated climatic values +23 °C / 50% r.h. and +90 °C / 50% r.h.
  • Insulated cover: Expands the temperature range to -40°C to +120°C
  • Misting equipment: Expands the test possibilities in the area of climate
  • UV sensors: 280 nm to 320 nm / 320 nm to 400 nm
  • Control of black standard temperature
  • Black standard temperature sensor
  • SolarTest sensor: 300 - 3000 nm
  • Printer: 6-color, programmable
  • S!MPATI software for Data Acquisition
  • RS 422/485 interface
Reference Test Specifications include:
Reference Test Specifications include:
  • EPA or others.
  • DIN 75220
    Ageing of automotive componentsin solar simulation units
  • MIL-STD 810
    Environmental engineering considerations and laboratory tests
Software download
Filter combinations





TOP